9 Best Line Out Converter For Sub

	KICKER 46KISLOC2 2-Channel Line Output Converter with Remote Turn-On Wire Check Price on Amazon
	Scosche LOC2SL Line Output Converter Adjustable Amplifier Add On Module for Car Stereo, 2-Channel Signal Sensing Speaker Wire to RCA Adapter with Remote Control Knob, Black Check Price on Amazon
	PAC SNI-35 Variable LOC Line Out Converter Check Price on Amazon
	AudioControl LC2i 2 Channel Line Out Converter with AccuBASS and Subwoofer Control Check Price on Amazon
	Magic source High to Low Converter Car Audio Speaker Cable to RCA Adapter for Subwoofer 2-Channel with Line Out Check Price on Amazon
	Audiopipe APNR-2002-RMT Hi Low Adapter Line Output Converter RCA Out Sub Control Check Price on Amazon
	DS18 V5HL 5-Channel Line Out Converter, High-Level Speaker Signal to Low-Level RCA Adapter with Built-in Audio Sensing Technology; Produces Remote Trigger Output to Control Your Aftermarket Equipment Check Price on Amazon
	AudioControl LC2i AccuBASS 2-Channel Line Out Converter with Wireless Qi Universal Phone Charger Kit. LOC Lets You Retain Factory Stereo and Play Aftermarket Subs, Amps and Speakers Loud Check Price on Amazon
	Kicker KISLOC 2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter Check Price on Amazon

Do you need a line output converter for subwoofer?

It is definitely true. If you want to get the signal from the amplifier, you don’t need a separate line output conversion to get it. This feature is offered by a lot of powered subs. Inside the amplifier is where the speaker-to-line level conversion takes place.

What is the purpose of a line out converter?

Line Out Converters takes the speaker input and converts it to a low power output for your amplifier.

How do I tap my rear speakers into subs?

A lot of powered subs have high level inputs, so you can just tap into them. The speaker wire on your car’s factory sub should be used. The speaker wires can be turned into a rca output with a basic line out conversion.

Can you hook up an amp and subs to a stock stereo?

Adding a sub to your factory stereo is a great way to increase your sound and retain your factory controls. The low-pitched sounds of bass and sub-bass can be produced by the nifty devices. It’s very easy to put one in a car stereo system.

What is a line output?

Computer Hope updated their website on August 2nd, 2020. The line out jack can be found on computer sound cards. It allows external speakers, headphones, or other output devices to connect to the computer and listen to the audio generated by the computer.

What is high level input on amp?

What is the level of input? The speaker wire leads on the back of the radio are used for high level inputs. The speaker wires can be used to send the input signal to the amplifier.

Can you add a subwoofer to a factory amp?

It is possible to install a subwoofer and amplifier to your factory system, and still have it sound great. If you want to learn more about how to get a killer system set-up in your car without changing your stereo, give us a call.

Do I need to bypass factory amp?

He bypassed the factory amplifier in order to make the music sound more clear. We recommend skipping the factory amplifier if there is one available. If you’re thinking about buying a stereo for your car, keep this option in mind.

Can you install a subwoofer without an amp?

Most of the time, the answer is yes. Unless you have a system in your car or boat that is already powered by a sub, you’ll need an amplifier that will power it. The low-power signal from your head unit can be used for an amplifier.

How do you hook up a subwoofer to a receiver without sub?

If your receiver doesn’t have a pre-amp output, you can use speaker wire to connect the subs to the speakers on the left and right side of the receiver. The left and right speakers should be connected to the speaker level terminals.

Do RCA cables go to input or output on AMP?

The speaker wire and cables are from the rcs. signal wiring isn’t usually included in a Amp wiring kit. The amplifier’s input signals come from the receiver.

Does Head Unit matter with subs?

It is recommended by most music lovers to build a car sound system from the ground up. Substituting your stock speakers won’t make up for the lack of power in your head unit.

Can I just add a subwoofer to my car?

Almost any existing car stereo system can be upgraded with simple subs from the aftermarket, which is very easy to do. Adding a sub to your audio system requires the installation of an amplifier and the purchase of a new one.

What is a line out on a bass amp?

Line Out will change the color of the sound before it is recorded. If you put a mic near the cabinet, it will give you the same sound you hear in your room when you play through the amplifier.

Is line out and speaker out the same?

Unpowered line-level signals do not have extra power to run speakers. Speaker-out can be used to adjust the volume with software.

Is Aux out the same as line out?

The impedance is the only difference between aux and line outs.

Can you connect speakers to line out?

The following is a list of the 3 things. The speaker cable needs to be plugged into the Line-out jack. This cable is often green in color. The speaker cable needs to be plugged into the laptop’s headphones jack.

Can I use a headphone jack as a line out?

Can a line level output be replaced by a headphones output? In a pinch, it usually works. Headphone Amps can be used without degradation in sound quality, even though they aren’t as free from noise and distortion as a good line amplifier.

What is line level input in subwoofer?

The signal to the subs is unaffected by the interaction of the amplifier’s output impedance with the speaker’s input impedance and there are less gain stages to add noise and distortion.

Is high level input better than RCA?

The cost of high level inputs can be a lot cheaper. If you need to make long runs, you’ll pay a lot of money for the RCA cables. Speaker wire is cheap and easy to run, making it less bulky than other cables.

Is high level input better?

High-level inputs are not as good as low-level inputs in a factory stereo system. The difference between high-level and low-level inputs on basic systems will not be different if you use an aftermarket stereo.

Why do amps have 2 inputs?

An amplifier has multiple inputs that can be used to connect audio sources. High impedance instruments connect to the high input while low impedance instruments connect to the low input. Volume isn’t determined by high input and low input on the amplifier.

What is audio line level?

A line level is the average level of the audio signal from mixers, signal-processing equipment and other consumer and professional audio gear. The consumer and professional levels are the levels of the line.

Can I use speaker wire for remote wire?

Speaker wires can be used in a different way. It doesn’t matter which type of wire you use. It is possible to use a copper wire as a remote wire. Most speaker wires are copper metal.

Can I use both high and low level outputs?

It’s not a good idea to connect the High Level and the Low Level at the same time. The two inputs run on the same circuit inside the REL will result in a lot of gain.

What does a hi low converter do?

The high-level signal from the radio’s speaker line can be converted to a safer low-level audio signal with the help of the adapter. Adding a 4-channel amplifier to your system will give you better sound quality.

How does a RCA converter work?

If you want to connect a DVD Player to a TV, you need to use an RCA-to-HDMI conversion box or something similar. You can connect your relevant HDMI display or device with the help of the three RCA plugs.

How do I tap my rear speakers into subs?

A lot of powered subs have high level inputs, so you can just tap into them. The speaker wire on your car’s factory sub should be used. The speaker wires can be turned into a rca output with a basic line out conversion.

Does a line out converter need to be grounded?

The speaker wire inputs need to be connected to the constant power and ground as well. A dedicated remote output is provided by this system, using a signal sensor input. If you have a multimeter, make sure your power connections are correct.

Do subwoofers drain car battery?

If the engine is off or the alternator cannot charge at a faster rate than the audio system requires, the battery will be drained and the audio system will not work. Poor installation and too much power may be the reasons for the draw.

Can you run 4 speakers and a sub off a 4 channel amp?

A four-channel amplifier works to power four speakers, two speakers and a sub, and can be used to power two speakers and a sub at the same time.

Can I add an amp to my factory amp?

Installation of a 4-channel amplifier with speaker level inputs is usually what you will do. If you want to connect it to a factory system, you can use the stereo’s speaker outputs. The outputs of the amplifier should be sent back to the stereo’s harness and the speakers should be connected to the factory wiring.

Can you wire SUBS to a stock radio?

Adding a sub to a factory stereo is a great way to increase sound and retain factory controls. The low-pitched sounds of bass and sub-bass can be produced by the nifty devices. It’s very easy to put one in a car stereo system.

Can you add a subwoofer to a factory amp?

It is possible to install a subwoofer and amplifier to your factory system, and still have it sound great. If you want to learn more about how to get a killer system set-up in your car without changing your stereo, give us a call.

Can a head unit power a subwoofer?

The head unit is capable of powering a sub. The best sound can be found in a location where the sub is located. The deep sounds of your music can be brought out with the help of the sub. It will improve your sound, but it won’t be as good as an amplifier would be.

Do powered subs need an amp?

The determining factor on how good a sub is is not whether it is powered or passive. The powered subs are the most popular as they have their own built-in amplifier and are not dependent on any amplifier limitations.

Can I connect subwoofer to pre out?

When using a pre-out, there are a number of connection options to choose from. If there are more than one input, you can use a single tip RCA cable and Y-Splitter. A dedicated sub cable is offered by a few companies.

Why do subwoofers have two line inputs?

An extra sensitivity adjustment can be made with a dual input. It would be enough to use a mono LFE signal from the processor. If your processor has a low output, you can use a Y-splitter. If you use both inputs with the same mono signal, you can double the sensitivity.

Do I need Accu Bass?

If your car’s bass has been rolled off or if it’s a clean flat signal, you need to know. You do not need Accubass if it is flat. If it is rolled off, Accubass can help. If you’re going to get a DSP in the future, you should get it.

Do subwoofers need a preamp?

It’s not the best way to connect a sub to a good music system. The preferred method works even if a preamp doesn’t have a high level input and you need a high level sub to do it.

How do you hook up a subwoofer to a home receiver?

Get to know each other. If you have a home theater receiver, you can simply run an audio cable from the receiver’s output to the sub’s line input, and you’re good to go. If the input is labeled LFE, you should use it.

Is a subwoofer cable just an RCA cable?

A subwoofer cable has more shield in it and provides more clarity and resolution, which is why it’s recommended.

What is RCA cable for subwoofer?

Subwoofers can be connected to home theater systems with the use of cables. Some cables diminish AC hum to produce a clear sound by offering higher shielding, which is why subs work with them. It’s important to buy a high-quality cable.

Can a car radio power a subwoofer?

Most of the time, the answer is yes. Unless you have a system in your car or boat that is already powered by a sub, you’ll need an amplifier that will power it. The low-power signal from your head unit can be used for an amplifier.

Is Aux out the same as line out?

The impedance is the only difference between aux and line outs.

What is the purpose of a line out?

The line out jack can be found on computer sound cards. It allows external speakers, headphones, or other output devices to connect to the computer and listen to the audio generated by the computer.

Can I plug speakers into line out?

The following is a list of the 3 things. The speaker cable needs to be plugged into the Line-out jack. This cable is often green in color. The speaker cable needs to be plugged into the laptop’s headphones jack.

Do speakers go into line out?

It is not possible to use a line for speakers. The speaker needs speaker-level signals to function. Line outs are a weak audio signal compared to speaker level signals. Line out won’t be able to give speakers enough power to do their job.

Can I use a headphone jack as a line out?

Can a line level output be replaced by a headphones output? In a pinch, it usually works. Even though they aren’t as free from noise and distortion as a good line amplifier, they can still be used in a lot of situations.

What’s a line out converter?

A line output conversion, or LOC, converts a speaker-level output signal into an input signal for an electronic device. The radio can be connected to the amplifier. It’s possible to connect a new radio to a car’s factory amplifier.

What does a line out do on an amplifier?

The back of your amplifier has a line out jack. The signal is leaving your amplifier and going to another place, like a PA system or recording gear.

What is line in and line out?

Sound cards, for example, have a line in and line out that are labeled on the device. Line out and line in both receive a signal input.

Why do subwoofers have left and right inputs?

You can use a Y splitter to separate two different paths, but the other way around. The receiver is used to do this. The signals from the left and right can be combined into a single channel.

What is the difference between line level input and speaker level input?

There are signals at the speaker level after amplification. The speaker level is what’s called speaker level after a line level signal enters an amplifier. Speaker cables are required for safe signal transfer.

How do you hook up a subwoofer to a receiver without sub?

If your receiver doesn’t have a pre-amp output, you can use speaker wire to connect the sub to the speaker terminals on the left and right side of the receiver. The left and right speakers should be connected to the speaker level terminals.

Can I use both high and low level outputs?

It’s not a good idea to connect the High Level and the Low Level at the same time. The two inputs run on the same circuit inside the REL will result in a lot of gain.

How do I connect my high level input to my amp?

If you want to accept high level inputs directly, you can use a high to low conversion. The best way to do that is to use a Line OutputConverter. This tool can be used to connect your radio’s speaker wires and convert the speaker-level signals into a preamplifier-level signal.

Is it better to use RCA or high level input?

The cost of high level inputs can be a lot cheaper. If you need to make long runs, you’ll pay a lot of money for rca cables. Speaker wire is cheap and easy to run, making it less bulky than other cables.

What is line level input in subwoofer?

The signal to the subs is unaffected by the interaction of the amplifier’s output impedance with the speaker’s input impedance and there are less gain stages to add noise and distortion.

Is RCA or high level better?

You should use low-level inputs if you are going higher. signal degradation can occur when high level inputs are connected incorrect. Some people prefer to run the RCA cables instead of splicing in high-level inputs because of that.

Can I use both amp inputs at the same time?

You can mix the signals of two guitars before entering the amplifier. If you want to mix the relative loudness with the volume pots, you can use the Y-adaptor.

Can an amp have multiple inputs?

An amplifier has multiple inputs that can be used to connect audio sources. High impedance instruments connect to the high input while low impedance instruments connect to the low input.

What is the difference between high and low input on amp?

The “Hi” input reduces the input signal by between 10 and 15 decibels. The “low” input won’t be able to do this. The signal levels of different guitars and basses are vastly different.

Which is louder mic or line level?

The sound will be loud and distorted if you connect a line-level source to a mic-level input. Some higher end mixers have mic and line level switchable inputs and outputs.

Can XLR carry line level?

mic level signals and line level signals can be carried on most mics. The low-level guitar outputs and speaker inputs from a power amplifier are vastly different levels, which is why the 1/4′′ is used.

How many dB is a good speaker?

The louder your speaker is, the more sensitivity it has. The speaker’s sensitivity is between 87 and 88dB. Excellent speakers have a sensitivity rating over 90 decibels.

Is 100 dB speaker loud?

Most of the time, pushing our own home theatre speakers to this level is not required. I like my music loud and I find that an average of 100 to 105 decibels is about as loud as I can listen to.

Is 16 gauge speaker wire good for subs?

The speaker wires are connected to each other. 12-gauge speaker wire can be used if the sub system is going to put out more than 1,000 wattrms. 16-gauge speaker wire is good for most installations.

How do I tap my rear speakers into subs?

A lot of powered subs have high level inputs, so you can just tap into them. The speaker wire on your car’s factory sub should be used. The speaker wires can be turned into a rca output with a basic line out conversion.

What does a subwoofer remote wire do?

The amplifier and the remote turn on wire stop working when the vehicle is not in use. The amplifier will always be on if the remote turn on wire is connected to a wire in the vehicle with constant voltage.

Why is my remote wire not powering my amp?

The thicker the wire, the higher the battery voltage. To make sure the wire isn’t loose, corroded, or shorted out, check for any inline fuses. Continuity on the ground wire is the next thing to look for.

Can I use speaker wire for remote wire?

Speaker wires can be used in a different way. It doesn’t matter which type of wire you use. It is possible to use a copper wire as a remote wire. Most of the speaker wires are made of copper metal.

Can pre OUT be used for subwoofer?

It is a good idea to use a pre-out connection in this situation because of the internal amplifier of the subs. Adding all kinds of channels to your home theater is possible with them.

Is a subwoofer cable just an RCA cable?

A subwoofer cable has more shield in it and provides more clarity and resolution, so it’s a good idea to use it.

How do I hook up a subwoofer to my RCA cable?

If the receiver/amplifier and the subwoofer use the same type of cable, plug it in using the same type of cable. If the cable is split between the right and left channels, use the R and L ports to connect it.

What is an LFE cable?

There is a letter A. There is a dedicated true connection for 1/LFE. There is one channel that will be used for sound applications. The cable needs to be connected between the two of you. There is aLFE input on the REL and the sub.

Does it matter what line output converter you get?

Even if your amplifier is good, it can’t perform well if it doesn’t get the signal it needs. The LOC is your main unit. Picking the wrong amplifier is worse than picking the wrong speakers.

Do you have to ground a line out converter?

You should be okay if you make sure the wire is solid. Unless the loc is powered, you do not need to. You don’t need to ground it if you don’t want to.