9 Best Shocks For Chevy Silverado

	Monroe Shocks & Struts Load Adjusting 58654 Shock Absorber Check Price on Amazon
	Detroit Axle – Front Rear Shock Absorbers Replacement for Chevy GMC Silverado Sierra 1500 2500 HD- 4pc Set Check Price on Amazon
	Detroit Axle – Rear Shock Absorbers Replacement for Chevy GMC Silverado Sierra 1500 [w/o Electronic Suspension] – 2pc Set Check Price on Amazon
	Compatible with 99-06 Silverado Sierra Tailgate Assist, Truck Tail Gate Lift Assist Tailgate Shock Compatible with 1999–2006 Chevy Silverado, GMC Sierra 1500 2500 3500 Models & for 2007 Classic Models Check Price on Amazon
	Detroit Axle – 2WD Front and Rear Shock Absorbers Replacement for 1999-2006 Silverado Sierra 1500 (w/o Electronic Suspension) – 4pc Set Check Price on Amazon
	Monroe 58637 Monroe Load Adjust Shock Absorber Check Price on Amazon
	Shock Mount Upper Rear Compatible with Chevy GMC 1999-2007 Sierra Silverado with Round Tube X-members (excludes C/K series and 07 new body) Check Price on Amazon
	Rough Country N3 Front & Rear Shock Absorber for 1999-2006 Chevy Silverado Sierra 1500 4WD 3.5-6.5″ Lift – 4SCGM990636 Check Price on Amazon
	NEW BILSTEIN FRONT & REAR SHOCKS FOR 88-99 4WD CHEVY K1500 TRUCKS & GMC K1500 SIERRA TRUCKS, 46MM GAS PRESSURE SHOCK ABSORBERS, TRUCKS, BASE CHEYENNE LS SCOTTSDALE SILVERADO SPORT SL SLE SLS SLT SLX Check Price on Amazon

How much does it cost to replace shocks on a Silverado?

There is a cost estimate for the replacement of the suspension of the Chevrolet truck. The labor cost is between $224 and $282 while the parts cost between $985 and $1,039 The number and age of Chevrolet Silverado 1500’s on the road are used to calculate this range.

What shocks give the smoothest ride?

You can get shocks that are almost identical to factory tunings such as the Bilstein B4 series, the KYB Excel-G Series, and the Monroe OE Spectrum. The most forgiving valving is found in all of them.

When should shocks be replaced on a truck?

That is up to the person. Driving on rough or unpaved roads can shorten the functional life of a vehicle. It is possible to replace them at 40,000 or 50,000 miles. It might be reasonable to travel 75,000 to 90,000 miles.

Do shocks really make a difference?

The customer may think that new shocks will make their ride easier to ride, but the truth is that they can do a lot more. It’s possible for a vehicle to make a corner and brake like it used to.

Do I need to replace all 4 shocks at once?

If you want to have even, predictable handling and control, you should always replace the shocks and struts in pairs. All four of them have been on the same vehicle for the same amount of time.

How do I know when my shocks are bad?

Unusual noises over bumps, excessive body lean or sway in turns, or that the front end of the vehicle dives in hard braking are some of the signs that a car is in bad shape. Steering control can be affected by bad shocks and tire wear can be caused by them.

Which is better Bilstein or Rancho?

Ranchos offers low pressure gas to make it easier to operate high pressure gas. The monotube construction makes Bilstein 5100 more sturdy. The 9000XL shocks are painted and zinc plated, which helps.

How much does it cost to replace shocks on a truck?

Between $450 and $1,100 is the average price for a shock and strut replacement. The cost of an individual shock and strut assembly can range from $150 to $900, while the cost of replacing a shock and strut assembly can be anywhere from $150 to $300 per assembly.

Should you replace shocks and struts at the same time?

It’s always a good idea to replace the shock and struts at the same time. The left and right/strut shocks wear down at the same rate. There is a good chance the right side needs to be replaced if the left shocks are damaged.

What is the difference between shocks and struts?

A shock is not a structural part of the vehicle’s suspension system, which is why it is different from a struts. The steering system of the vehicle is very important and the alignment angles are very important. The angle of the caster is usually adjusted on the struts.

Is it OK to just replace rear shocks?

If you replace both fronts and backs at the same time, you will be fine. If you only replace a few shocks, you’ll see a big performance drop. The handling and control of your vehicle will be worse.

How many miles do shocks last?

The shocks and struts wear out over time. They will wear out quicker if you are a more aggressive driver. When it comes to shocks and struts, they don’t go out at the same time.

Is it OK to change only 1 shock absorber?

If only one of the shock absorbers is bad, should you replace it? It isn’t necessary, but it is recommended to replace them in pairs. There is a shock absorber on the rear of the vehicle. The old shock absorber doesn’t absorb road bumps as well as the new one.

Can you replace just 1 shock?

Don’t replace one shock at a time, no matter how you go about it. It’s almost certain that you’ll get even handling as a result, which could cause problems down the road.

Can you drive with bad shocks?

If your shocks and struts don’t work, you shouldn’t drive your car for a while. Your vehicle’s stability is at risk if you drive with bad shocks. Poor handling, excessive body roll, and wobbly steering wheel are some of the things that you will experience.

What does bad shocks sound like?

Clunking or knocking sounds may be heard when shocks and struts are worn out. The metal to metal contact causes this sound. The noises could be caused by worn components.

Why does my truck ride so bumpy?

A bumpy ride can be caused by a tire that doesn’t have enough air, or a tire that isn’t aligned correctly.

When should I change my shocks on my Silverado?

There is a certain amount of mileage. Depending on the make and model of your car, shocks need to be replaced every 50,000 miles. It’s a good idea to have your mechanic check the shocks or struts at least once a year.

Which is better gas or hydraulic shocks?

The oil can be forced through the valve if the shocks are not compressed. The feel of the ride is softer when the shocks are slowed.

Are bigger shocks better?

The bigger the passage, the less resistance the shock will give. A shock absorber needs to be adjusted to match the vehicle it is attached to.

How long should Rancho shocks last?

There’s a lot of feedback on how long the RanchoRS9000XL shocks last. It is possible to dial in the handling or comfort depending on the driver’s needs.

Do Rancho shocks lift your truck?

Rancho has released a new larger shock series that helps deliver precisely controlled off-road performance to lifted trucks and sport utility vehicles.

Do I have to jack up my truck to change shocks?

The shocks are affected by the weight of the truck.

Is it hard to replace shocks?

Replacing your shocks is easy if you know how to do it. If you’re interested, you’ll need to purchase a new pair of shocks that are the same as what you’re currently using or a performance upgrade.

How much do new struts cost?

The cost of struts is a bit higher. The total cost to replace a pair of struts is between $400 and $1000, with wheel alignment included. The cost of an individual assembly is between $150 and $350, while the cost of a pair is between $100 and $300.

Do trucks have shocks or struts?

Many suspension designs use shock absorbers and separate springs to support no weight. Some cars use only one pair of wheels, while the other pair uses separate springs and shocks.

Should I replace both rear shocks at the same time?

Why do shock absorbers have to be replaced? When a shock absorber needs to be replaced, the companion across the same shocks must also be replaced to make sure that they are still working.

Can you drive without a rear shock absorber?

It is not possible to say yes. It’s not something you should do. The alignment angles can be affected by damaged or collapsed springs. The ride is rough and the car is difficult to control in an emergency.

How long does it take to replace rear shocks?

It can take between 2 to 3 hours to replace a single set of shocks. Replacing a spring or shock absorber is less work than you might think. It becomes a question of days, not hours, when it comes to uspension changes.

Do I need shocks or struts?

It is recommended that you replace your shocks and struts every 12,000 and 50,000 miles, respectively. Pothole and speed bumps, front-end nose-dives, and leaking shock fluid are some of the signs of failing shocks.

Is Rancho a good shock?

Rancho, thank you for the amazing shocks! The ride improved greatly over the original equipment manufacturer. Just a tip, it was easy to install. If you don’t put the bottom in place before you release the shock, you’ll have a hard time getting it to fit again.

Are Bilstein shocks better than Monroe?

The budget performance of Monroes is similar to that of the original equipment manufacturers. Heavy trucks and offroad vehicles will not feel comfortable if there are serious shocks.

How much does it cost to replace shocks on a Silverado?

There is a cost estimate for the replacement of the suspension of the Chevrolet truck. The labor cost is between $224 and $282 while the parts cost between $985 and $1,039 The number and age of Chevrolet Silverado 1500’s on the road are used to calculate this range.

Are front shocks more important than rear?

The front shock has to be more aggressive because it has to damp a spring that is very stiff. The shocks at the back are a bit more lazy and have more fluid displacement, so they can be softer and still damp.

Are rear shocks important?

The stabilization of your vehicle’s movements is aided by the use of shocks and struts. The vehicles of today use shocks or a combination of them.

How should new struts feel?

Push down each corner of the vehicle if you walk to it. The corner will rise back into place. If it springs back up and settles quickly, it’s fine. You might have a problem if it takes a long time to get back into place or if it bounces up and down before it settles.

Do I need to replace all 4 shocks at once?

If you want to have even, predictable handling and control, you should always replace the shocks and struts in pairs. All four of them have been on the same vehicle for the same amount of time.

Do shocks leak oil?

What is the cause of leaking in shock absorbers? A shock absorber is an oil pump with a hole in it. They have a rod that goes through the shock. The seal on the top of the shock can be damaged, which can cause the oil to leak.

What causes shocks to leak?

If your shock absorber is leaking, it’s most likely because of the fluid in it. A fluid-filled cylinder with a sliding piston is what your shock absorber is likely to be. When the fluid presses against the piston, it causes it to absorb energy.

How do I know if I need new shocks?

If you want to check out the condition of the shocks and struts of your car, push them down hard on each corner. The shocks on the vehicle need to be replaced if it keeps bouncing after you let go.

What happens if you don’t replace shocks?

The performance of your brakes can be adversely affected if your shocks are worn. In an emergency, the stopping distance of your vehicle may increase. You are more likely to skidding on wet roads.

What is the difference between shocks and struts?

A shock is not a structural part of the vehicle’s suspension system, which is why it is different from a struts. The steering system of the vehicle is very important and the alignment angles are very important. The angle of the caster is usually adjusted on the struts.

Can shocks be compressed by hand?

The spring is what holds the car up, it’s the only thing that controls the wheel’s speed. Most people can’t move with their hand unless they go slow and spring is hard to move with your hand.

Why does my truck squeak when I go over bumps?

You can cause your suspension to protest loudly if you get in and out of the vehicle. The squeaking can be a result of worn ball joints or bushings. The quality of your ride is not good.

When replacing shocks what else should be replaced?

It’s better to replace shocks andstruts on all four wheels at the same time than it is to do it in pairs. Maintaining a consistent response on both sides of the vehicle is important.

Why do I feel every bump in my steering wheel?

When your car doesn’t have enough suspension to absorb the bumps it will drive over and the tires will hit the bottom of your car when the suspension is compressed. When your car bounces over bumps, it’s because you drove over one. It is a bumpy ride when you can feel the bumps.

Will new shocks make my truck ride smoother?

The customer may think that new shocks will make their ride better, but the truth is that they can do more. It’s possible to make a vehicle corner and brake like it used to.

Should you replace shocks and struts at the same time?

It is always a good idea to replace shocks and struts at the same time. The left and right/strut shocks wear down at the same rate. If the left shock is damaged, there’s a good chance the right one needs to be replaced as well.

Which shocks give the smoothest ride?

You can get shocks that are almost identical to factory tunings such as the Bilstein B4 series, the KYB Excel-G Series, and the Monroe OE Spectrum. The most forgiving valving is found in all of them.

Are bigger shocks better?

The bigger the passage, the less resistance the shock will give. A shock absorber needs to be adjusted to match the vehicle it is attached to.

Which is better gas or hydraulic shocks?

The oil can be forced through the valve if the shocks are not compressed. The feel of the ride is softer when the shocks are slowed.

Do shocks come with lift kits?

Sometimes a lift kit will come with replacement shocks instead of the original ones. You can keep your vehicle’s stock shock absorbers even if the kit isn’t included. The stock shock absorbers were lifted by the RAM 1500.

Are Fox shocks better than Rancho?

Rancho’s flat landings, surprise obstacles, and aggressive obstacles are more difficult to absorb than Fox’s high speed damping.

How long should Rancho shocks last?

There’s a lot of feedback on how long the RanchoRS9000XL shocks last. It is possible to dial in the handling or comfort depending on the driver’s needs.

Are FOX good shocks?

The FOX Jeep shocks are made of aluminum, which has a higher thermal conductivity value than low carbon steel. The aluminum FOX shocks are more resistant to rust than the painted steel ones.

Is Rancho or Bilstein better?

Ranchos offers low pressure gas to make it easier to operate high pressure gas. The monotube construction makes Bilstein 5100 more sturdy. The 9000XL shocks are painted and zinc plated, which helps.

Which Bilstein shock is better truck?

The B6 4600 shock can be used if your truck is at stock ride height. If you install lift components on your truck and need a longer shock, then the B8 5100’s are for you. Both shocks are equally good.

Are Rancho 9000 shocks good?

The shocks were great. These shocks are supposed to be used to replace the original shocks. After watching a few videos online, it was easy to install the shocks. The ride is very smooth when I set them to four.

What is the difference between Rancho RS5000 and RS5000X?

An upgrade over their previous product doesn’t match the consistent ride quality of a monotube shock, which is what Rancho’s new improvedRS5000X is.

What is the difference between Rancho RS5000 and rs9000?

The major difference between the 5000 and 9000 is that the 9000 can be adjusted. It was the same shock, but for something else.

Can you change shocks yourself?

If you don’t want to pay an expensive mechanic’s fee and need to replace your car’s shock absorbers, you can do it yourself. The car’s performance is dependent on the shock’s ability to give it a smooth ride. The vehicle’s suspension wear out over time.

Can I replace just one rear shock?

If only one of the shock absorbers is bad, should you replace it? It isn’t necessary, but it is recommended to replace them in pairs. The old shock absorber doesn’t absorb road bumps as well as the new one.

How much does it cost to replace shocks on a truck?

It can cost between $450 and $1,100 to replace a shock and strut. The cost of an individual shock and strut assembly can range from $150 to $900, while the cost of replacing a shock and strut assembly can be anywhere from $150 to $300 per assembly.

How much do new struts cost?

The cost of struts is a bit higher. The total cost to replace a pair of struts is between $400 and $1000, with wheel alignment included. The cost of an individual assembly is between $150 and $350, while the cost of a pair is between $100 and $300.

Do I need shocks or struts?

It is recommended that you replace your shocks and struts every 12,000 and 50,000 miles, respectively. There are signs of failing shocks that include taking potholes and speed bumps, front-end nose-dives, and leaking shock fluid.

How long do shocks last?

If your car has been damaged, you can expect your shocks to last 10 years. 5 years is all you can expect if you have been using your car for a long time. For the average driver, 7 or 8 years is the maximum life expectancy.

When should you replace shocks on a truck?

There is a certain amount of mileage. Depending on the make and model of the car, shocks or struts need to be replaced every 50,000 miles. If your operating manual recommends it, you should have your mechanic check the shocks or struts on a regular basis.

How much does it cost to replace shocks on a Silverado?

There is a cost estimate for the replacement of the suspension of the Chevrolet truck. The labor cost is between $224 and $282 while the parts cost between $985 and $1,039 The number and age of Chevrolet Silverado 1500’s on the road are used to calculate this range.

Should you replace all 4 struts at once?

If you want to have even, predictable handling and control, you should always replace the shocks and struts in pairs. All four of them have been on the same vehicle for the same amount of time.

What happens if you don’t replace struts?

A vehicle’s weight can shift during braking and cause longer stopping times and distances. This makes it harder for you to stay in control of your car.

What is the difference between shocks and struts?

A shock is not a structural part of the vehicle’s suspension system, which is why it is different from a struts. The steering system of the vehicle is very important and the alignment angles are very important. The angle of the caster is usually adjusted on the struts.

How long does it take to replace rear shocks?

It can take between 2 to 3 hours to replace a single set of shocks. Replacing a spring or shock absorber is less work than you might think. It becomes a question of days, not hours, when it comes to uspension changes.

Can you drive a truck with one shock?

Is it possible to drive with damaged shock absorbers? Yes, that is correct. It isn’t going to be a comfortable journey. A broken shock absorber will cause your car to bounce around and cause other problems.

Can you replace rear struts yourself?

Repairs can be done at home. Replacing shocks and struts is the same as that. It’s not a job that you should attempt if you don’t know how to work with vehicles, but with a little training and experience, you’ll be able to do the job.

Should you replace shock absorbers in pairs?

Why do shock absorbers have to be replaced? When a shock absorber needs to be replaced, the companion across the same shocks must also be replaced to make sure that they are still working.

Does my truck have struts or shocks?

Look at the bottom part of the absorber instead of looking for coil springs. If it’s held in place by just one bolt, you’ll know you have shocks. If your vehicle has an upper control arm, you will have a shock as well.

Are shocks in the front or rear?

Most modern vehicles have shock absorbers on the rear of the vehicle. It’s rare to have only shocks on one of the axles.

Is it worth it to replace struts?

Unless your vehicle is bouncing like it’s on a pogo stick or bottoms out on the railroad tracks, you don’t need to replace the springs. They can rust in climates that are cold.