The direction of the chainsaw blade is the same no matter what type or model of chainsaw it is. The edges of the blade should always be facing in the same direction. If you look from the top, you will see that the sharp edges are facing in a different direction.
Contents
Can you put a chainsaw chain on the wrong way?
Don’t get your chain on backwards with this Chainsaw Chain Direction. It’s easy to get the chainsaw chain direction correct. The cutter has to be facing towards the tip of the chainsaw bar to view the chain at the top of the bar.
Why is my chainsaw blade smoking?
The dull chain exerts a lot of pressure on the bar and chain in order to cut it. A lack of bar and chain oil, or an inferior type of oil that is being slung off the chain, could be the reason for this.
How tight should a chainsaw blade be?
The chain should feel snug, but it still pulls. The “snap” test is to make sure the saw chain is tensioned correctly. Pull the chain on the underside of the guide bar so that one or two drive links can be released from the guide bar rails. The chain needs to be snapped into place.
Why does my chainsaw blade go dull so fast?
Is the wood you’re using to cut it particularly dirty? Many chainsaw enthusiasts say that their blades are duller when they are cutting muddy wood. Maybe the only reason your blade is dulling is because the logs are muddy.
Why is my chainsaw burning the wood?
The chainsaw can heat up and burn the wood if the chain is sharp. The chain may not be sharp enough if the wood is burning. This phenomenon can be explained by the fact that you’ve used the equipment many times and never done its maintenance.
Does a chainsaw chain stretch?
A chainsaw chain is stretched and loosened. The chain gets very hot when it’s cut through wood. The guide bar is expanded by the heat and the chain is stretched. As the chain wears down, it’s going to loosen.
Do you flip the bar on a chainsaw?
The chainsaw bars are mounted upside down or right side up. The user will be able to extend the life of his chainsaw bar by 50%. The areas that are heavily used will get some relief from wear and tear if the bar is flipped.